Cart is empty 
Beschreibung
General
| Number of amplifier channels | 2 |
| Max total output all channels driven | 1200 W |
| Peak output voltage per channel | 50 Vrms |
| Max. output current | 16 Arms |
Max output power (all channels driven)
| 2 ohms | 500 W |
| 4 ohms | 600 W |
| 8 ohms | 300 W |
| 16 ohms | 150 W |
Performance
| THD 20 Hz – 20 kHz at 1 W | <0.1% |
| THD at 1 kHz and 1 dB below clipping | <0.05% |
| Signal to Noise Ratio | >102 dBA |
| Channel separation (Crosstalk) at 1 kHz | >80 dB |
| Frequency Response | 2 Hz – 42 kHz |
| Input impedance | 18 kOhm |
| Common Mode Rejection (CMR) | 50 dB |
| Output impedance | 25 mOhm |
Gain, Sensitivity and Limiters
| SCVPL | 70 V peak |
| Sensitivity for full power | 6 dBu |
| Gain (all DSP controls set to 0 dB) | 30.2 dB |
| Level adjustment (per channel) | Software controlled from -inf to 0 dB |
Connectors and Buttons
| Analog input connectors (per ch.) | Neutrik XLR, 3pin female |
| Analog input link connectors (per ch.) | Neutrik XLR, 3pin male |
| AES input connectors (per ch.) | Neutrik XLR, 3pin female |
| AES input link connectors (per ch.) | Neutrik XLR, 3pin male |
| Output connectors (per ch.) | Neutrik speakON / binding post |
| Buttons | Power, Menu, Back, Mute (per ch.), Power |
| Encoder | Adjust / Set |
| Cooling | Single fan, front to rear airflow, no filter required, temperature controlled speed |
Power
| Nominal voltage | 100 – 240 VAC |
| Operating voltage | 60 – 265 V AC |
| Standby consumption | <6.5 W |
| Mains connector | IEC inlet |
Dimensions
| Dimensions (Rack rail to rear panel) | W: 483 mm (19”), H: 44 mm (1 U), D: 272 mm (10.7”) |
| Dimensions (Overall incl. handles and rear support) | W: 483 mm (19”), H: 44 mm (1 U), D: 344 mm (13.5”) |
